Playgrounds




The playground surface has to protect a person from serious or lethal head injury when falling down from the playground equipment. Therefore a playground surface should meet or exceed the critical fall height of the installed playground equipment. Traditionally natural turf or loose materials, like wood or chips or even sand, are used for impact absorption at playgrounds. The quality of these materials is influenced by weather and pollution. Synthetic surfaces, like rubber tiles, are an alternative but synthetic turf is also a popular solution. This synthetic turf is typically a sand filled or dressed turf, similar to low-end field hockey turf. The sand is necessary to 'balance' the turf and to protect against vandalism.

However, this sand filled turf does not absorb impacts and will not give fall protection. To achieve the necessary fall protection, the synthetic turf can be combined with ProPlay for Playgrounds shock pads, to reach critical fall heights of more than 3 meters. The ProPlay shock pads can be installed easily at a sand or crushed stone subbase, or an (existing) concrete subbase. Due to the very high (water) permeability, the surface will remain 'dry' during and after heavy rainfall.


Product chart playgrounds (2016)

* Critical Fall Height measured at 3.1 m, but since the maximum allowed free height of fall (in Europe) is 3 meters, the certificate states 3.0 m.

Note: Above critical fall heights are measured according to EN 1177:2008 when combined with a 24 mm pile height synthetic turf filled with 25 kg/m² silica sand.


Products that are suited for playgrounds are:

ProPlay25

Get specs

ProPlay35

Get specs

ProPlay45

Get specs

ProPlay55

Get specs